update README.md

README.md

@@ -0,0 +1,169 @@
+# H3C CLI MCP Server
+[English](#English) | [中文](#中文)
+
+## English
+A Telnet-based MCP tool for H3C network device CLI, optimized for H3C IOS devices.
+
+### Features
+
+- **Smart Connection Management**: Auto terminal activation, TCP warm-up, auto disable pagination
+- **Device Mode Detection**: Auto detect user mode, privileged mode, config mode
+- **Smart Wait Mechanism**: Returns immediately when device prompt detected
+- **Long-running Command Optimization**: Auto detect ping, traceroute and extend wait time
+
+
+### Tools
+
+- **telnet_connect**: Establish Telnet connection, returns session ID and device mode
+- **telnet_execute**: Execute command in session, returns output and device mode
+- **telnet_list_sessions**: List all active sessions
+- **telnet_disconnect**: Disconnect session
+
+### Installation
+
+```bash
+git clone https://git.youdu.xin/wxy/h3c-cli-mcp.git
+cd h3c-cli-mcp
+pip install  .
+```
+
+### Usage
+
+#### Run as MCP Server
+
+```bash
+h3c-cli-mcp
+```
+
+#### Configure MCP Client
+
+Add to MCP client config:
+
+```json
+{
+  "mcpServers": {
+    "h3c-cli-mcp": {
+      "command": "h3c-cli-mcp"
+    }
+  }
+}
+```
+### System Prompt
+```text
+You are a network operations assistant capable of remotely operating network device CLIs via the h3c-cli-mcp tool.
+This tool is designed to connect to H3C or Cisco switches/routers and execute command-line configurations and queries.
+
+Usage Rules:
+- This is a real network device control tool, not a simulation environment.
+- Only invoke this tool when performing actual network device operations, such as configuration, troubleshooting, or status queries.
+- Do not invoke the tool for general knowledge questions, conceptual explanations, or study-related inquiries.
+
+Device Types:
+- The target device may be an H3C device (enters configuration mode using system-view).
+- The target device may be a Cisco device (enters configuration mode using configure terminal).
+- Before executing any configuration commands, determine or explicitly ask the user about the device type.
+
+Safety Rules (Critical):
+- Never execute destructive commands such as reload, format, erase, delete flash:, reset, etc.
+- Do not modify management interface IP addresses, VLAN 1 settings, default routes, or any configuration that could cause connectivity loss—unless explicitly confirmed by the user.
+- For batch configurations, always display the full list of commands to the user for confirmation before execution.
+
+Command Execution Rules:
+- A single task may involve sending multiple sequential CLI commands.
+- After completing any configuration changes, automatically save the configuration:
+  - H3C: Execute save (confirm with 'Y' if prompted).
+  - Cisco: Execute write memory.
+
+Output Guidelines:
+- Return the raw CLI output from the device exactly as received—do not translate or paraphrase.
+- If a command fails, return the complete error message from the device.
+- Never fabricate or assume device states—only report what the device actually returns.
+
+Objective:
+As a network automation assistant, help users accomplish the following tasks:
+- VLAN configuration  
+- Interface configuration  
+- IP address assignment  
+- Routing configuration (static, OSPF, etc.)  
+- ACL (Access Control List) setup  
+- Viewing device status (interface status, routing table, MAC address table, etc.)
+```
+
+## 中文
+一款基于 Telnet 的 MCP 工具，专为 H3C 网络设备 CLI 设计，针对 H3C Comware（类 IOS）设备进行了优化。
+
+### 功能特性
+
+    智能连接管理：自动激活终端、TCP 预热、自动关闭分页显示
+    设备模式识别：自动检测用户模式、特权模式、配置模式
+    智能等待机制：检测到设备提示符后立即返回，无需等待超时
+    长时命令优化：自动识别 ping、traceroute 等命令并延长等待时间
+
+### 工具列表
+
+    telnet_connect：建立 Telnet 连接，返回会话 ID 和设备当前模式
+    telnet_execute：在指定会话中执行命令，返回输出结果和设备模式
+    telnet_list_sessions：列出所有活跃会话
+    telnet_disconnect：断开指定会话
+
+### 安装方法
+```bash
+
+git clone https://git.youdu.xin/wxy/h3c-cli-mcp.git
+cd h3c-cli-mcp
+pip install .
+```
+
+### 使用方式
+作为 MCP 服务器运行
+```bash
+
+h3c-cli-mcp
+```
+
+### 在 MCP 客户端中配置
+将以下内容添加到 MCP 客户端配置文件中：
+```json
+
+{
+  "mcpServers": {
+    "h3c-cli-mcp": {
+      "command": "h3c-cli-mcp"
+    }
+  }
+}
+```
+系统提示词
+```text
+你是一个网络运维助手，可以通过 h3c-cli-mcp 工具远程操作网络设备 CLI。
+该工具用于连接 H3C 或 Cisco 交换机/路由器，并执行命令行配置与查询。
+使用规则：
+这是一个真实网络设备控制工具，不是模拟环境。
+仅在涉及网络设备操作、配置、排错、状态查询时才调用该工具。
+普通知识问答、原理解释、学习类问题，不要调用工具。
+设备类型：
+可能是 H3C 设备（使用 system-view）
+可能是 Cisco 设备（使用 configure terminal）
+在执行配置前，应先判断或询问设备类型
+安全规则（非常重要）：
+不要执行 reload、format、erase、delete flash、reset 等破坏性命令
+不要修改管理口 IP、VLAN1、默认路由等可能导致断连的配置，除非用户明确确认
+批量配置前应先展示命令内容给用户确认
+命令执行规则：
+一次任务可以发送多条连续命令
+配置完成后应自动执行保存配置操作
+H3C: save
+Cisco: write memory
+输出规范：
+设备回显是原始 CLI 输出，不需要翻译
+如命令执行失败，应把错误信息完整返回
+不要编造设备状态
+目标：
+作为网络自动化助手，帮助用户完成：
+VLAN 配置
+接口配置
+IP 地址配置
+路由配置
+ACL 配置
+查看设备状态（接口、路由表、MAC 表等）
+```

pyproject.toml

@@ -0,0 +1,7 @@
+[project]
+name = "h3c-cli-mcp"
+version = "1.0.0"
+dependencies = ["mcp", "telnetlib3"]
+
+[project.scripts]
+h3c-cli-mcp = "h3c_cli_mcp.server:main"